|
|
 |
Hase make various adaptions for their bikes and trikes...
Crank shorteners:
These clamp to any standard crank, to let you move the pedal to any position on the crank - reducing the travel of the pedal.
The shortener has two holes for 1/2” or 9/16” pedals, and is available for left or right.
Pendulum cranks:
These are similar to the crank shorteners, clamping on to any standard crank, but they have a second swinging section - the result is to let the pedal have the push-pull stroke but reduced fore-aft travel. You pedal in an oval instead of a circle. This is also good if you cannot lift your leg high enough for standard cranks.
The pendulum cranks can slide up or down the crank arm, and there are three holes on the pendulum section to adjust the pedal position. Standard 9/16” pedals only
Pedals with hooks & heel straps - securely hold your foot, but still let your ankle pivot. A tab makes it easy to hook the elastic over your heel. £30.
Special pedals adjustable at the feet. These offer more secure support than the above, with sliding side supports to position your foot precisely, secure velcro straps, and adjustable pedal position. Your ankle is still free to pivot. £100.
Special pedals with calf support. These use the same adjustable base as the above, but with an adjustable arm which attaches to your calf with a wide velcro strap. This holds your ankle secure and rigid. £140.
 |
The Important Small Print: All of this website is ©1995-2011 by Kinetics. Don't even think of pinching bits without asking. All prices, specifications and other information are subject to change without notice. I do my best to keep this site correct, but sometimes I get things wrong, and sometimes things change very quickly so I cannot keep up.
Last updated on:
27 April 2012
Kinetics, 54 Switchback Road, Bearsden, Glasgow G61 1AE, UK
tel: 0141 942 2552, email: mail@kinetics-online.co.uk
Opening hours: 10am to 5pm, Tuesday to Saturday.
